IT'S NOT JUST ABOUT SELLING QUALITY PRODUCTS,

IT'S ABOUT SOLVING OUR CLIENTS PROBLEMS

Dynice Data

Sizes: 12.4mm - 13.6mm

Category: Brand:

DynIce® Data is unique Patent pending fibre rope with a central copper conductor and dense copper screen to protect the signal from interference.

The line is made for both winch drums and traction winches and is suitable for scientific research where data transfer or control of tools is needed.

Description

DYNICE® DATA – LIGHTWEIGHT DATA TRANSFER CABLE FOR DEEP SEA OPERATIONS

A coaxial data transfer cable with central copper conductor and screen enclosed in a DynIce® Dux rope. Specially designed for data transfer from trawl headline sonars where high loads are on the cable while signal is sent or data retrieved.

The cable is also very suitable for deep sea research vessels using drum winches.

The production process is unique and patent pending. The construction is based on copper centre conductor with dense screen of copper filaments to protect from electromagnetic waves. The data cable can also be used as high strength single phase conductor.

Dynice Data Transfer Cable

DynIce® Data
Overall diameter
mm
Breaking strength
unspliced ton
WLL 5:1
ton
Density
kg/dm3
Weight of cable
in air kg/m
Weight of cable
in sea kg/m
12.4 7.5 1.4 1.35 0.163 0.038
13.6 9.5 1.7 1.25 0.181 0.030

 

Info
Copper conductor 2,19 mm2
Copper screen with >95% coverage 4,17 mm2
Resistance of conductor 11,0 ohm/km
Resistance of screen 5,7 ohm/km
Impedance 41 ohm
Capacitance 151 pF/m
Attenuation at 40 kHz 0,023 dB/km

 

 

BEHAVIOUR OF HEADLINE CABLE DURING TOWING

 

Forces in Headline | Dynice DataThere are three main forces acting on the head line cable
One is the sinking weight of the cable in sea, another is the drag of the cable itself and the third is the pulling force on the headline sonar which is fixed to the trawl.

 

Dynice Data Suitable Pulling Force When the pulling force is suitably adjusted the headline cable is taut and if steel wire is used it will slope bit down due to the weight.
DynIce® Data will have similar slope but in the opposite and upward direction.
Dynice Data Pulling Force
If there is a slack in the headline cable the steel wire falls down, it can touch the warps during turning and even fall into or below the trawl and damage it the warps.
DynIce® Data, due to its lightness will be pushed upwards by the drag and stay above the warps and the trawl.
Schools of fish in front of the trawl are therefore not cut through by the headline cable leading to reduced catch.

 

 

COMPARISON OF PROPERTIES

Steel cable
– corrodes
– hard to splice if broken
– weight of 2.000 m in air is 880 kg
– weight of 2.000 m in sea is 676 kg
– density 4,47
– can damage trawls and DynIce® Warps
– lifetime about 1-2 years
DynIce® Data
+ no corrosion
+ spliceable
+ weight 2.000 m in air is 326 kg
+ weight 2.000 m in sea is 76 kg
+ density 1,35
+ will not harm trawls or DynIce® Warps
+ lifetime + 4 years

 


 

First Dynice Data in Faroes Trawler Trondur

DynIce® Data was first taken into use by the Faroese trawler Trondur i Gøta. The length of the cable on the headline cable winch is 2.700 m. According to captain Frits Thomsen the picture on the screen is sharp and the quality of the signal excellent.

Dynice Data in Trawler Gudmundur ve 29

The DynIce® Data cable has been in use on the trawler Gudmundur VE 29. The length installed is 1.000 meters. Captain Sturla Einarsson tells that the cable is a brilliant product and during trawling near the surface the DynIce® Data stayed above the surface until few meters in front of the sonar and did therefore not disturb the fish coming in.

Our Location

Hampidjan New Zealand Ltd
82 Vickerman Street,
Port Nelson, New Zealand
Phone: +64-3-548 7942

Timaru Branch
110 Fraser Street, Timaru
New Zealand
Phone: +64-3-688 0037